PU leather is the skin of polyurethane component. Widely applied to make luggage, clothing, shoes, vehicles and furniture decoration, it has received increased recognition of the market a wide range of applications, the number of large, variety, is the traditional natural leather can not be met. PU leather quality is also good and bad, good PU leather even more expensive than the price of leather.
With the fleece for the bottom base, the solution is a coating made of polyurethane. Impregnating solution from the felt with a polyurethane coating and a water bath after solidifying the resulting microporous layer after grinding Serve polyurethane suede. The leather texture, light, soft, wearable, warm, feel not affected by temperature change, and suitable for the production of clothing, more advanced packages, bags and decorative items.
including fabric processing, plastic material preparation, coating, laminating, gelled, surface treatment, embossing, cooling, coiling processes. The main production methods are four kinds.
The rubber coated with a spatula directly on the pretreated fabric, then gelled into a plasticized and plasticized box, and then embossing, cooling and other processes, that is finished. This method can produce all kinds of ordinary leather cloth, leather and foam leather foil.
Also known as indirect coating method. The paste used in reverse roll coating or blade carrier (release paper or stainless steel tape) and, after gelling and then in Burkina without tension compounded by gelling material layer, and then plasticized, cooled and peeled off from the carrier, and then post-processing, derived products. This method is suitable for the production of knitted fabric or non-woven fabric-based foam leather and ordinary leather.
According to recipe requirements, the resin, plasticizers and other compounding agents metering, mixing into a kneader, and then the mixer and open mill or an extruder after mixing plastic, to the three-roll or four-roll calender (see plastics machinery film thickness and width rolled into the desired, and with pre-heating of the fabric fit, then by embossing, cooling derived products. this method can produce a variety of different leather cloth.
The resins, plasticizers and other ingredients mixed in a kneader, after refining plastic, extruded from the extruder certain thickness and width of the film, and then on a three-roll setting machine and preheated fabric bonded then preheated, foil, embossing, cooling derived products. This method is used to manufacture thick products, such as floor coverings, conveyor belts and the like.
Backing: Imitation of cotton wool
Packaging Details:40 meters per roll or according to your requirement
Delivery Detail:Shipped in 15 days after payment
Knitted fabrics with soft, moisture permeability, warm perspiration and other characteristics, most with excellent flexibility and extensibility. Woven fabric having a relatively high yield, suitable for small batch production characteristics. Knit apparel to wear comfortable fit and body, no arrests tight sense, can fully reflect the body curve.
Circular woven fabrics
Or said weft knitted fabrics. The main products are: knitted jersey, cotton cloth, rib fabrics, mesh cloth, fleece, air layer, polyester cover up, terry cloth, pull flannel, terry cloth, artificial fur and so many, there are many changes in the mixed weave methods such as: changes in the organization flat rib, jacquard, tuck, Tim yarn tissue, tissue liner, terry and other organizational changes. Due to the different pin laws weave, the same product will be a lot of changes, such as: there is a small mesh mesh cloth, beads and mesh, pineapple, waffle and so on.
Flat woven fabric
Or said warp knit fabric. The main products are: cross-rib, sweater fabric, yarn sweater fabric, warp plain weave fabric, warp knitting mesh fabric, warp suede, warp pile fabrics, warp knitted terry cloth, terry toweling warp and many more.